While Intel's classic 4x4 NUCs have been pretty powerful systems capable of handling demanding workloads, the company never cared to install its top-of-the-range CPUs into its compact PCs. GEEKOM apparently decided to fix this and this week introduced its Mini IT13: the industry's first 4x4 desktop with an Intel Core i9 processor, offering with 14 CPU cores inside. 

The Mini IT13 from GEEKOM measures 117 mm × 112 mm × 49.2 mm, making it as small as Intel's classic NUC systems. Despite its compact size, it can pack Intel's mobile-focused 14-core Core i9-13900H (6P+8E cores, 20 threads, up to 5.40 GHz, 24 MB cache, 45W) that comes with integrated Xe graphics processing unit with enhanced performance (Xe-LP, 96 EUs or 768 stream processors at up to 1.50 GHz). 

To maintain consistent performance of the CPU and avoid overheating and performance drops of even under significant loads, the system employs a blower-style cooler, which produces up to 43.6 dBA of noise, so the machine is not exactly whisper quite to say the least.

The compact PC supports  up to 64 GB of DDR4 memory through two SODIMMs, an M.2-2280 with a PCIe 4.0 x4interface and an M.2-2242 SSD with a SATA interface, and an additional 2.5-inch HDD or SSD for more extensive storage.

As far as connectivity is concerned, the GEEKOM Mini IT13 comes with a Wi-Fi 6E+ Bluetooth 5.2 module, a 2.5 GbE port, two USB4 connectors, three USB 3.2 Gen2 ports, one USB 2.0 Type-A connector, two HDMI 2.0 outputs (in addition to two DPs supported through USB4), an SD card reader, and a TRRS audio jack for headphones. 

Although GEEKOM does not directly mention it, the USB4 ports potentially allow to connect an external graphics card in an eGFX enclosure and make the Mini IT13 a quite decent gaming machine. Meanwhile, even without an external graphics card, the unit can support up to four displays simultaneously.

Interestingly, the GEEKOM IT13 machine does not cost an arm and a leg. The cheapest version with Core i5-13500H, 16 GB of RAM, and a 512 GB SSD can be purchased for $499, whereas the most expensive model with Core i9-13900H, 32 GB of memory, and 2 TB of solid-state storage costs $789.

Source: Geekom

Comments Locked

21 Comments

View All Comments

  • meacupla - Friday, August 25, 2023 - link

    I wonder why they went with DDR4 SODIMM, when DDR5 SODIMM isn't that much more expensive, and would give the i9 a substantial boost in performance
  • abufrejoval - Monday, August 28, 2023 - link

    I guess mostly, because they didn't have to re-design a previous AD board that way: DDR5 was outrageous back then.

    Then that substantial boost is mostly a myth, especially on these NUCs where very few people run workloads that are *still* RAM bandwidth constrained, after Intel has invested most of the chip area into really sophisticated caches.

    NUCs are mostly designed for relatively light workloads, the high-end NUCs to handly short peaks as if they were potent desktops. I use them as µ-servers, but again not for sustained high-rate workloads, where these would just run into thermal constraints.

    The major benefit of faster RAM is slightly better iGPU performance, but few if any buy this class of NUC for GPGPU or gaming.

    I quite like the fact that I could reuse existing DRAM sticks, even if they are wonderfully cheap these days. I certainly paid dearly for my DDR4 SO-DIMMS when they weren't.

    Of course if you buy fresh today, you may want to use a model with DDR5 for better future RAM reuse, but those are around, too.
  • coder543 - Friday, August 25, 2023 - link

    Literally about 2 days ago, SimplyNUC announced an i9-powered 4x4 NUC, which they also claimed was the first. So which is it? Who was first? Is SimplyNUC just white-labeling Geekom's product? The pictures look similar but distinct.
  • coder543 - Friday, August 25, 2023 - link

    https://simplynuc.com/news/simply-nuc-unveils-the-...

    https://simplynuc.com/onyx/
  • ganeshts - Friday, August 25, 2023 - link

    The are pretty much identical in industrial design and ports layout.. only difference is that 2 Type-A ports in the Onyx are USB 2.0 vs (1x 2.0 + 1x 3.2Gen2) in the IT13, and the two USB4 ports in the Onyx are 20Gbps only (so 10 Gbps data + DP output), while they seem to be full-featured 40 Gbps in the IT13. And, the SDXC controller is fronted by a full-sized SDXC slot vs. microSDXC slot.

    My educated guess is that SimplyNUC is using Shenzhen Jiteng Network Tech. as a ODM or OEM. That is GEEKOM's parent company. They probably have an agreement that the private label brand can't carry the same product spec as the one being marketed by SimplyNUC - so they made some port changes. But, the puzzling aspect is that the Mini IT13 is better specc-ed connectivity-wise compared to the Onyx. I know SimplyNUC does comment on AnandTech, so maybe they will let us know.
  • ganeshts - Friday, August 25, 2023 - link

    FWIW, the ASUS PN 53 and the GEEKOM AS 6 are one and the same, down to the BIOS. Only the boot logo is different (and even that goes away when you flash the latest BIOS from the ASUS support site). Something a little bit similar is going on here, I suspect.
  • meacupla - Friday, August 25, 2023 - link

    Onyx is equipped with DDR5-5200
  • ganeshts - Friday, August 25, 2023 - link

    That is a big difference. Thanks for noting. It is a pity that the high-performance memory subsystem of the Onyx is not matched by correspondingly high-performance connectivity options.
  • PeachNCream - Friday, August 25, 2023 - link

    A 45W chip in a NUC-sized box is not exactly an accomplishment to lose one's mind over.
  • ballsystemlord - Friday, August 25, 2023 - link

    They just posted 2 articles about AMD stuff, so now they have to add one on Intel's products...
    (Just the thoughts of an evil System Lord.)

Log in

Don't have an account? Sign up now