MGE Sidewinder: A Look at a Gaming Chassis
by Purav Sanghani on October 16, 2004 11:31 AM EST- Posted in
- Cases/Cooling/PSUs
Installation
We expected the installation of our test bed to take about 15-20 minutes, since we had to use screws to mount each piece of hardware, but how long does it really take to turn a screwdriver a few times, right?
Click to enlarge.
Total time for installation took no more than about 10-15 minutes, even with two optical drives added. Installation of components was pretty straight forward and since we knew what went where, it made every aspect of the installation that much easier.
Click to enlarge.
Sometimes, though, there are parts of a case where we might have trouble installing a particular part. For example, the expansion card slots may be a bit tight and sometimes slightly off center in order to install a card perfectly without a hitch, and hten we would have to force the card down. This could damage the card, or worse, the motherboard.
Facebook
Twitter
RSS
12 Comments
View All Comments
ciwell - Monday, October 18, 2004 - link
#11, then you would be working for ANTEC. :DLoneWolf15 - Monday, October 18, 2004 - link
I'm starting to think I should go into case design. All I'd have to do would be to make tasteful cases that actually cater to the people who build their own computers, as it appears few manufacturers are actually doing this, including this one. How about designing something with reasonable expansion, front mounted ports, a few mounts for large fans that move lots of air at lower noise levels, out of solid materials, with a modest look but easy to mod later? No aliens, no snakes, no naked chick truck mudflap logos...function first, with just enough basic form to be appealing.ciwell - Monday, October 18, 2004 - link
Good review...I think the last sentence in it says it all.Operandi - Sunday, October 17, 2004 - link
#8 Hmmmmm... Put a $90 PSU in a $4.99 case that seems like a likely scenario.....shabby - Saturday, October 16, 2004 - link
#7 the funny part is that they didnt even use the psu that came with the case, they used an ocz one, check page 8 lolGundamit - Saturday, October 16, 2004 - link
#6 - What's really revolting is the 17A on the 12V rail. Get it? "Re-Volting" It like a ... oh nevermind.diehlr - Saturday, October 16, 2004 - link
Someone please give these case designers a clue. These cases with gaudy X's and tacky colored plastic are asthetically revolting.stephenbrooks - Saturday, October 16, 2004 - link
LOL @ #3I stared deeply into the chromed button and could only see a couple of black chairs in a white office, though, one with someone's coat hanging on it. Which page were you on?
Myrandex - Saturday, October 16, 2004 - link
I am actually glad they reviewed it, because I was considering purchasing it for a computer I am gonna build soon (saw it for sale @ directron). Haven't made up my mind yet, but yea I am glad they reviewed it.Jason
Budman - Saturday, October 16, 2004 - link
I can see a reflection of the reviewer in the chromed button. :)