SilverStone Technology Temjin 6: Another BTX Style in an ATX Form
by Purav Sanghani on September 25, 2004 12:05 AM EST- Posted in
- Cases/Cooling/PSUs
Benchmarking - Thermal
When benchmarking the Temjin 6, we test the temperatures of key components including the actual CPU temperature, the actual temperature inside the heatsink, the temperatures of the DDR, Northbridge, Southbridge, HDD, PSU, and the ambient temperature inside the case, all during normal operation. During our testing, the PSU and CPU heatsink fans remain on to measure temperatures during normal system operationsChaintech VNF3-250 |
 Click to enlarge. |
The thermal readings for the key components and points on the motherboard during operation were as follows:
The wind tunnel design isolated the heat off the CPU heatsink from the rest of the system, which kept the ambient temperature in the case to a minimum. Since the dual 120mm fans concentrated on cooling the memory and CPU, thermal levels were kept to the extreme minimum, proving SilverStone's patented system to be 100% effective! We definitely hope to see this in future designs.
Facebook
Twitter
RSS
28 Comments
View All Comments
PuravSanghani - Saturday, September 25, 2004 - link
Also, looks are a matter of personal preference. Like they say, "One mans garbage, is another mans treasure." or something like that. ;)PuravSanghani - Saturday, September 25, 2004 - link
#5: I agree that a "miesely 80mm fan" wouldnt be able to do the job of cooling a system in a regular ATX case, but again, the use of that clear plastic casing to separate the hottest running components, CPU and RAM, helps keep that heat from circulating to the rest of the case, specifically by moving it out the back.pirred908 - Saturday, September 25, 2004 - link
#5-What wrong with it being top heavy? Are you affraid its going to tip over?! It probably weighs a ton.
-The noise was measured from a foot away. If your that close you your computer, your wierd.
-Anyone who cares about cooling doesn't use stock fans anyway. I'd be switching them out ASAP for high CFM high pressure fans.
-Vertically mounted HDD's is probably a better idea, I agree.
-The case is HUGE, you don't need a removable motherbaord tray. Anandtech entioned that.
I think its a great case, and I'm not trying to badger you, I'm just making counter points.
Subhuman25 - Saturday, September 25, 2004 - link
Whata rubbish review.The case looks awful.Sure it's not a gawdy comic book character looking case,but it's also not very appealing to my conservative eyes.
Top heavy.No dust filters.
Is the cooling that extraordinary to warrant such a high noise level trade-off?? I think not.
Speaking of cooling,what about the rest of the components in the case i.e. Northbridge chip,video card,mosfets etc.?
They're left to a miesely 80mm fan?
Can vertical mounted hard drives be a good idea?
The stylus now has to fight gravity in one direction when searching the platters.No?
No vibration dampening grommets mentioned.No removable MB tray.
I/O panel positioned too low.
epiv - Saturday, September 25, 2004 - link
Avalon - Saturday, September 25, 2004 - link
49db if your head is within 12" of the case. If it's on the floor and you're in a chair, it's going to sound a bit quieter. This case's thermal properties sound awesome. I wouldn't mind the noise either. I'm running an open case right now with a volcano 7+ set to medium, so the Silverstone wouldn't bother me a bit.Gooberslot - Saturday, September 25, 2004 - link
I think this review understates the sound issue. 49db is definitely not quiet.Zepper - Saturday, September 25, 2004 - link
Good review. It's too bad that Silverstone doesn't get someone in there that really understands what's going on. So close, but no cigar. I still think the Berserker is the best one in their lineup and they had nothing to do with the internal design of it..bh.
got the first one in again - whassamatta you?